HELP key guides you at any moment |t in the language of
the connected electrode polarised even when switched off
pressure compensation and display 800-1100 hPa
up to 7200 values (8 bit mode) or up to 3600 values (16
bit mode), + time & date
analogue recorder shows measurements on the graphic
line & rechargeable battery operation with
programmable automatic shut-off
12 V car adapter.
set-up option permits to customise the meter to the needs
of the user.
Selectable resolution down to 0.1 mg/l or 1%.Automatic
calibration with pre-programmed saturated °2
Salinity compensation up to 40 %0 NaCl.
Automatic temperature compensation.
Automatic atmospheric pressure compensation.
GLP-compatible calibration of temperature probe.
Graphic display for better readability.
Hold function allows to freeze the display for convenient
reading or recording.
No special software required for data acquisition.
Programmable interval from 1 up to 9999 seconds.
Printer output on command or at timed intervals.
Two-way communication with any computer using RS232.
Programmable recorder output.
Programmable identification number for use with a printer
Password protection prevents any unauthorised access to
Shows percentage of remaining battery capacity.
An oxygenmeter Its
electrode function according to the Clark principle with
platinum as cathode and silver as anode in an
electrolyte cell to which a polarisation voltage is
applied. Oxygen gas present in the electrolyte is
reduced to OH ions at the platinum cathode. The
resulting current is diffusion limited and therefore
proportional to the oxygen concentration in the sample
solution. This current is amplified, corrected and
displayed in mg/l or % of dissolved oxygen.
with attached 6 Channel MCA Probe (MCA=Multi-Component